William Welliver My interface is shown temporarily installed at the Hill and Dale Foundry for Monotype University 8: the pneumatics are hung from a heavy duty zip tie and the interface board is held in a custom aluminum enclosure. I actually don't recommend using an approach like this, unless the interface board is mounted permanently. The interface board is fairly light and it has a tendency to get pulled and knocked around otherwise.
Name | Type | Size | Updated | Updated By |
![]() |
image/jpeg | 131 kb | Tuesday, 12 April 2016 | Bill Welliver |
![]() |
image/jpeg | 123 kb | Tuesday, 12 April 2016 | Bill Welliver |
![]() |
image/jpeg | 155 kb | Tuesday, 12 April 2016 | Bill Welliver |
![]() |
image/jpeg | 46 kb | Tuesday, 12 April 2016 | Bill Welliver |
![]() |
image/jpeg | 71 kb | Tuesday, 12 April 2016 | Bill Welliver |
![]() |
image/jpeg | 58 kb | Tuesday, 12 April 2016 | Bill Welliver |